
Every commercial automatic door has a mode switch, usually a small key or toggle box mounted near the header or at the operator. Most calls we get about a "broken" door in Little Rock, Conway, and the surrounding area turn out to be a switch left in the wrong position, not a mechanical failure. Knowing what each setting does can save you a service call, or at least help you tell us exactly what's going on when you do call.
The Common Settings and What They Actually Do
Most operator control boxes offer the same handful of positions, though the labels can vary slightly by brand:
- Auto (or On): The door opens for anyone triggering the sensor or activation plate on either side, both in and out. This is the normal operating mode for business hours.
- Exit Only: The door will open from the inside but will not respond to outside activation. People can leave, but it will not open for someone walking up from the parking lot.
- Open (or Hold Open): The door stays open continuously, which is useful during deliveries, move-ins, or heavy foot traffic so the operator isn't cycling every few seconds.
- Off (or Locked): The operator is disabled entirely. The door will not power open from either side, though it may still function as a manual door depending on the hardware.
Some control boxes add a "Low Energy" or push-and-go mode for assisted operation, but the four above cover what most staff interact with day to day.
Exit-Only at Closing Time
A lot of retail, restaurant, and office locations switch to Exit Only at closing so the last customers and employees can leave through the automatic entrance while it stops drawing people in off the street. It's a reasonable habit, but it only works if someone switches it back to Auto before the next opening. We've been called out to "dead" front doors more than once where the only issue was a switch still sitting on Exit Only from the night before. Before anyone assumes the operator failed, check that setting first.
Hold-Open for Deliveries
Grocery stores, medical offices, and hotels in Conway and Little Rock lean on Hold Open mode constantly, propping the door for carts, gurneys, luggage, or a steady stream of foot traffic. It's a legitimate use of the switch, but leaving a door in Hold Open longer than needed means it's not cycling closed, which can affect climate control inside and leaves the entrance unsecured. Get in the habit of returning the switch to Auto once the delivery or rush is finished.
Why the Wrong Setting Looks Like a Broken Door
From the customer's side of the glass, a door on Exit Only or Off looks identical to a door with a failed operator. It just sits there. That's why we always ask about the mode switch position before we ask about anything mechanical. If your door won't open for someone walking up, but swings fine when pushed or when someone exits, the switch is the first thing to check, not the operator. Confirming this takes a few seconds and can rule out a trip charge you didn't need.
Training Staff So the Door Isn't Blamed for a Switch
Because the switch is usually tucked near the door frame or at a manager's station, whoever opens or closes the building needs to know where it is and what each position does. A few habits worth building into opening and closing checklists:
- Confirm the switch is on Auto before the first customer of the day.
- Return the switch to Auto any time it's moved to Open or Exit Only for a delivery, event, or closing routine.
- Note the switch position when reporting a door issue, so whoever answers the call can rule it out quickly.
- Limit who has access to the switch, especially if it's a keyed control, so it isn't changed without anyone knowing.
A quick note taped inside a manager's drawer describing what each position does goes a long way toward keeping new or part-time staff from flipping the wrong switch.
When It's More Than the Switch
If the switch is confirmed to be on Auto and the door still won't respond, or if it opens but closes too fast, too slow, or with too much force, that's a job for a certified AAADM technician with the right testing equipment. Force, timing, and sensor adjustments on a commercial operator are safety-critical settings that shouldn't be guessed at, and CSC Automatic Doors has serviced these systems for businesses across central Arkansas since 1976.
If your automatic door isn't behaving the way it should, give CSC Automatic Doors a call at 501-514-4932. We serve Little Rock, Conway, North Little Rock, Benton, Bryant, Maumelle, Jacksonville, Searcy, Russellville, Cabot, Sherwood, and Hot Springs, and we can tell you quickly whether it's a setting or a service need.
Frequently asked questions
Who should be allowed to change the mode switch on our automatic door?
Keep it limited to managers or whoever opens and closes the building. The fewer people who can flip it, the less likely it's left on the wrong setting by mistake.
Our door opens when pushed but not when someone walks up to it, is that broken?
That's the classic sign of a switch on Exit Only or Off rather than a failed operator. Check the switch position before assuming it needs service.
Can hold-open mode damage the door if we leave it on too long?
The switch itself isn't harmed, but leaving a door propped open longer than needed affects indoor climate control and leaves the entrance unsecured, so it's best used only for the duration of the delivery or rush.